Operating Voltage:DC6V,1.5V,4 "AA" Alkaline Batteries
Center Distance:60 or 70 mm
Remote Control Distance:20 meters(Need to long press the unlock key until the door is unlocked)
Read Card Distance:up to 3cm
IC Card Type:Mifare-1(13.56MHZ)(specially encrypted by us)
Program a code:Input Master User password(00123456#),door open,then input *1#1#UUPP#(UU is the user code,password is PP)before the keypad light turns off.
Add a RFID card:After Master User verification,door open,then input *2#1#UU# (UU is the user code,01&02 have been used, you can add other 54 codes), then put the card close to inductive zone.
Add a remote:Master User verification,input *3#1#U#,U is user code(1-8,1 has been used,7 codes available).
Automatic normally open:After Master User verification,input *9#2#1# or hold # key for 3 seconds.In this mode,it won't automatically lock after open once, no need to input code every time for a busy door.
Program a 4 digit code on the key pad:Directly readd a 4 digit code by adding the password function,also can change your password into 4 digits by modifying password function.
Modify the Master User code:Input *5#UU#CP#NP#(UU:user code;CP:current password;NP:new password).Code users can change the code by their own, no need to know master code,the one who knows master code can easily add or delete normal users.
Restore factory setting(two ways):1.Open the battery cover,press and hold the initial button 3 seconds,all users are deleted,master user password was recovered to 00123456. 2.Input master user password to verify,door open,then input *9#99#999#, the system will be recovered to factory default.
Tips: 1.IC card and remote are specially encrypted by us, can't support get from other store. 2.Press any key or touch the screen first to get the key pad light on before inputting the password.